JM Clipper Distributor
JM CLIPPER GASKETS
JM Clipper Gaskets comes in three styles described below.
GASKET STYLE 978-C
Description: this gasket is a dense, aramid/inorganic fiber reinforced, compressed, NBR sheet with a special, high temperature, anti-stick parting agent applied to both sides. It's high strength and excellent resistance to hot creep and broad chemical resistance make it an ideal high performance gasket material.
Application: gasket style 978-C can be used for gasketing in piping, machinery, or equipment containing steam, petroleum based liquids, gases and mild acids or alkalines. It may also be used in most solvents excluding MEK and high aromatics. Gasket style 978-C also has excellent sealability in ethylene glycol coolants and silicone fluids.
GASKET STYLE 1078
Description: gasket style 1078 WHITERILE is an off-white, compressed, NBR/synthetic fiber sheet that is recommended for service where color contamination is a concern. It is also a good choice for cutting intricate gaskets requiring especially clean cuts. With a high temperature parting agent as a standard surface treatment, 1078 is an excellent choice for general service gaskets.
Application: gasket style 1078 is recommended for use on process piping and equipment and all types of machinery. It can be used in mild acids and alkalis, water, steam, gasses, oils and gasoline, It can be used in most solvents excluding MEK and high aromatics. Gasket style 1078 also has excellent sealability in ethylene glycol coolants and silicone fluids.
GASKET STYLE NA-60
Gasket NA-60 is a low cost, NBR/aramid fiber, compressed gasket sheet made with all the great features of premium gasket materials without the cost. Only the best raw materials are used, without compromise. Gasket NA-60 is recommended for general service gaskets on all machinery, process piping and equipment. It offers broad chemical resistance, cutability, flexibility and is low in cost.